No.0 Machinery Get a quote +86 135 8587 6500
Home/Products/Plastic Sheet Bending Machines/No.0 Fully Automatic CNC Plastic Bending Machine
PLASTIC SHEET BENDING

No.0 Fully Automatic CNC Plastic Bending Machine

LH-1500(ZH) – LH-5000(ZH)Feed, position and bend from one program.
No.0 Fully Automatic CNC Plastic Bending Machine LH-1500(ZH) – LH-5000(ZH) — plastic cases
up to 25 mm(0.98 in)Sheet thickness
1500–5000 mm(4.9 ft–16.4 ft)Bending length
2000 mm(6.6 ft)Max. feed length
±0.1 mm(0.00 in)Feed accuracy

Feeding, positioning and bending are handled by the program: set each feed length and bend angle on the screen, and one program runs a whole sequence of bends without marking out or re-jigging.

What it solves

01
Marking out is slow

Every bend line is pencilled and aligned by hand.

Changeover is slower

A new size means a new jig and a new setup.

Angles drift

Hand-folded parts do not match from the first piece to the last.

Core value

02
01

Feed 2000 mm per stroke, ±0.1 mm.

02

One program, multiple angles.

03

No grooving, no weld seam.

How it works

03
  1. 01
    Servo feeding

    Up to 2000 mm per stroke, repeatability ±0.1 mm.

  2. 02
    Multi-angle program

    Each bend angle is set separately; one program runs the sequence.

  3. 03
    Buffered bending

    High-density sheet does not fracture at the line.

  4. 04
    No grooving

    Parent material stays continuous, so strength is not reduced.

Specifications

04
Sheet thicknessup to 25 mm (0.98 in)
Bending length1500–5000 mm (4.9 ft–16.4 ft)
Max. feed length2000 mm (6.6 ft)
Feed accuracy±0.1 mm (0.00 in)
Power6–14 kW
Voltage380 V / 50 Hz

Advantages

05

Automation

  • Feed, position and bend run from one program.
  • 2000 mm per feed; long parts continue automatically.
  • Recipes stored and recalled by size.

Forming

  • Multi-angle bends from 60° to 180°.
  • Buffered stroke protects thick sheet.
  • No weld seam: tanks can be water-tested immediately.

What it bends

06
Plastic casesWater tanksProcess vesselsDust-collector housings

Machine detail

No.0 Fully Automatic CNC Plastic Bending Machine — detail 1 (LH-1500(ZH) – LH-5000(ZH))No.0 Fully Automatic CNC Plastic Bending Machine — detail 2 (LH-1500(ZH) – LH-5000(ZH))

Video

Send a sample sheet

Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.

Request a trial bend

Also known as

07
CNC Plastic Bending MachineAutomatic Sheet Bending MachineServo Feed Bending MachineCNC Sheet BenderAutomatic Plastic BenderProgrammable Sheet Bender

All names above refer to this machine — see the full alias index.

FAQ

08
How is it different from a standard machine?

Servo feeding up to 2000 mm per stroke at ±0.1 mm; a stored program runs all the bends.

How long does a size change take?

Recall a stored recipe in minutes; a new size needs one trial part.