No.0 Automatic Acrylic Lampshade Bending Machine

Lampshades are thin, large and easily scratched — one touch leaves a mark on the optical face. A vacuum gripper handles the sheet, two heating lines fold both sides at once, and one U-shaped shade leaves the machine every 13 seconds.
What it solves
01Handling marks show up on prismatic surfaces.
Folding one side, turning the sheet and folding again accumulates error.
Standing at a machine to load and unload is a job few want.
Core value
0213 seconds per shade.
No touch marks on the optical face.
Both folds symmetrical.
How it works
03- 01Gripper handling
Vacuum cups pick and place without touching the optical face.
- 02Two lines, one pass
Both fold lines soften together, so the U is symmetrical.
- 03Water + air cooling
The bend is set, then blown dry: no water marks, ready to stack.
- 04Five automatic steps
Load, heat, bend, cool, unload run as one sequence.
Specifications
04| Sheet thickness | 0.7–3 mm (0.03 in–0.12 in) |
|---|---|
| Heating length | 1500 mm (4.9 ft) |
| U-shape width | 60–175 mm (2.4 in–6.9 in) |
| Cycle | 13 s per shade |
| Gripper capacity | up to 1500 × 175 mm (6.9 in) |
| Voltage / power | 220 V / 3 kW |
Advantages
05Automation
- Vacuum gripper loading; thin sheet keeps its shape.
- 13 seconds per U-shade; one operator can tend several machines.
- Automatic and manual modes for trials.
Forming
- Both folds in one pass: symmetrical U.
- Water cooling plus air blow-off, no drying rack.
- Only the fold line is heated: prismatic texture stays intact.
What it bends
06Machine detail


Video
Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.
Request a trial bendAlso known as
07All names above refer to this machine — see the full alias index.
FAQ
08How fast is one shade?
13 seconds per U-shaped shade, including loading, heating, bending, cooling and unloading.
Can the gripper scratch the optical face?
No. Vacuum cups handle the sheet without touching the prismatic surface.

